Water Hose

Series 100
        Premium Water Hose, Hardwall                
A premium water hose that is resistant to sea water,
mild acids, toilet effluent, hot engine water, and
external abrasion. Constructed with helical wire 
embedded between 2 plies of synthetic fabric for 
maximum flexibility. 
SIZE 1/2" I.D. thru 1-3/8" I.D. 
DESC. Black with green stripe. 
PACKAGING 12-1/2ft. lengths. 50 ft. coils

Series 101
         Premium Sanitation Hose 
The premium sanitation hose designed for most critical 
toilet and holding tank connections with maximum
resistance to toilet effluent and odor. Constructed
with wire helix embedded between 2 plies synthetic
fabric for maximum flexibility. 
SIZE 3/4" I.D. thru 1-1/2" I.D. 
DESC. Black with green stripe. 
PACKAGING 12-1/2 ft. lengths. 50 ft. coils

Series 110
        Premium Water Hose Softwall
A premium water hose that is resistant to sea water,
mild acids, toilet effluent, hot engine water, and 
external abrasion. 2 ply construction where wire helix
is not necessary for light bends.
SIZE 1/2" thru 1-3/8" I.D.
DESC. Black with green stripe.
PACKAGING 12-1/2ft. lengths. 50 ft. coils.

Series 120
        Bilge Pump Hose
A corrugated polyethylene hose resistant to oily bilge
and sea water. Designed for live well aerators, 
bilge discharge, sink, and shower drains.
Durable, flexible, and abrasion resistant.
SIZE 5/8" I.D. thru 1-1/2" I.D.
DESC. Black or White
PACKAGING Bulk cartons. 50 ft. P/O cartons.
 Standard poly bags.

Series 130 / 160
        Standard / Extra Heavy Duty
                                                                                Water Hose  
EPDM heater hose, 2 ply polyester reinforced for
engine heater hose, heat exchanger, air conditioner 
circulation, and bilge. Also good for sink, icebox, 
shower, and live well drains. Meets or exceeds
SAE 20R3. Series 160 is an extra heavy duty hose
with 4 ply construction for critical water application 
where high strength and durability are most important.
SIZE 1/2" I.D. thru 1-1/2" I.D.
DESC. Black with white letters
PACKAGING Bulk coils. 50 ft. P/O cartons. 
Standard poly bags.

Series 141
        Lightweight Vinyl with Black Helix
A highly flexible FDA formulated clear PVC/ black 
helical-tubing for potable water fill, sink, bilge pump, 
shower, icebox, and live well drains (above the waterline).
SIZE 3/4" I.D. thru 1-1/2" I.D.
DESC. Clear with black helix.
PACKAGING 100ft. coils. 50 ft. P/O cartons.

Series 143
        Sani-Flex H/D VAC
Heavy duty PVC hose with corrugated plastic helix 
that gives excellent flexibility and bend radius. 
Manufactured from FDA approved materials exhibiting
low water absorption resulting in low odor permeation.
Excellent for potable water, complete
sanitation systems, and all systems. 
Use a series 147 cuff.
SIZE 3/4" I.D. thru 1-1/2" I.D.
DESC. White / FDA Formulated.
PACKAGING 100 ft. coils. 50 ft. P/O cartons.

Series147
        Cuffs - H/D Sani-Flex
Right hand threaded soft PVC cuffs provide for
added clamping protection when using Series 
143 H.D. Corrugated Sani hose. For water tight
seal apply with sealing compound.
SIZE 3/4" I.D. thru 1-1/2" I.D.
DESC.  White
PACKAGING  Each

Series 148
    "Flex" Sanitation Hose - Smooth H/D
A smooth wall extra heavy duty multi-purpose PVC hose
especially formulated and compounded from FDA materials
exhibiting low odor permeation. Excellent for all sanitation
systems, below water drains, potable water, water intake 
systems, and aerators. Smooth cover permits clamping 
without cuffs. Recommended double clamps and sealing
compounds for below waterline connections.
SIZE 5/8" I.D. thru 2" I.D.
DESC. FDA Formulated, White
PACKAGING 100 ft. coils. 50 ft. P/O cartons. 
Standard poly bags

Series 149
        Live Well Hose
An extra heavy duty walled all vinyl hose with hard 
PVC helix, smooth inside and outside, that gives
good flexibility and bend radius. For live well intake
and drain also excellent for bilge pump discharge and 
drain lines. Smooth wall permits easy clamping.
Formulated with FDA type materials.
SIZE  5/8" I.D. thru 1-1/2" I.D.
DESC.  Clear with black helix. Also solid black
PACKAGING  100 ft. coils. 50 ft. P/O cartons.

Series 150
        Clear PVC Tubing 
A clear FDA formulated PVC tubing for low pressure 
cold water applications in sink, shower, refrigerator,
and live well drain lines.
SIZE  1/4" I.D. thru 1-1/2" I D.
DESC. Clear
PACKAGING 200 ft. coils. 25 & 50 ft. P/O cartons.Standard poly bags.

Series 162, 163 & 164
    

Red - Clear - Blue - PVC 
Reinforcement Tubing
A heavy walled, nylon reinforced PVC tubing compounded 
with FDA formulated materials for applications requiring
non-toxic, tasteless, odorless tubing. Hot or cold pressurized 
systems. Vent and drain lines, bilge pump discharge. 162 
Red tracer for hot and cold tap water. 163 Extra heavy wall.
164 Blue tracer for cold tap water.
SIZE  3/8" I.D. thru 2" I.D.
DESC. Red Tr. - 162. Clear - 163. Blue Tr - 164
PACKAGING  250 ft. coils. 50 ft. P/O cartons. 
Standard poly bags

Series 166
        Boat & Camper Hose
FDA formulated premium drinking water and superior
dock side wash down hose. Braided reinforcement 
and coupled with brass full flow couplings.
SIZE  5/8" I.D.
DESC. White
PACKAGING  Lengths of 25, 50, 75 & 100 ft

                        Marine - Electrical  Hose

Series 125
    Electrical Conduit
A split wire conduit designed to provide chafing protection
and quality appearance for multi-wire harness or cable routing.
Also available in High Temperature Nylon.
SIZE 1/4" I'D. thru 2" I.D.
DESC.  Black
PACKAGING  Bulk cartons, 50 & 100 ft. P/O cartons

Series 127
        Sternflex Hose
Sternflex hoses are primarily designed as a conduit hose for
containing wires, control cables, and hoses between transom 
and outboard motor/sea drives when using a stern bracket.
It can also be used for vanity sink and shower drains and is 
ideal for above water line scuppers.
SIZE 1-1/2" I.D. thru 2" I.D.
DESC. Gray, black & white
PACKAGING 50 ft. lengths.

 Marine - Exhaust  Hose

Series 200
    

Certified Wet Exhaust Softwall    SAE J2006 R1
Certified wet exhaust, heavy wall reinforcement with 2, 4, or 6 plies of synthetic cord. Designed for engine water circulation, heat, heat exchanger, heavy duty discharge lines and  straight marine wet exhaust connections. Meets or exceeds USCG, ABYC, and SAE J2006 R1  standards for wet exhaust service. Recommended for short straight connections.
SIZE 1-1/2" I.D. thru 16" I.D.
DESC. Black with blue stripe.
PACKAGING 50 ft. coils thru 3". 12-1/2 ft. lengths.

Series 250
       

Certified Wet Exhaust       Hardwall SAE J2006 R2
Certified wet exhaust, heavy wall with helical wire reinforcement
between (4) plies of rayon fabric. Compounded to resist engine heat, exhaust fumes, ozone, mild acids, toilet effluent, salt water, and abrasion. Meets or exceeds USCG, ABYC, and SAE J2006 R2 standards
for wet exhaust service.
SIZE 1/2" I.D. thru 8" I.D.
DESC.   Black with blue stripe.
PACKAGING   50 ft. coil thru 8" I.D. 12-1/2 ft. lengths.

Series 252
        Corrugated Wet Exhaust  SAE                                                                    J2006 R2
Corrugated wet exhaust, heavy wall with helical wire reinforcement between (4) plies of rayon fabric. Compounded to resist engine heat, exhaust fumes, ozone, mild acids, toilet effluent, salt water, and abrasion. Meets or exceeds USCG, ABYC, and SAE J2006 R2 standards for wet exhaust service. Available for Severe-Bend Applications.
SIZE 1-1/2" I.D. thru 8" I.D.
DESC. Black with Blue stripe.
PACKAGING 50 ft. coil thru 4" I.D. 12-1/2 ft lengths.

 Marine - Fuel  Hose

Series 315
    "Flex-Alcohol" Alcohol Resistant Type B Fuel
Excellent resistance to heat, ozone, and permeation by 
alcohol blended gasoline and diesel fuels. Compounded 
to meet or exceed SAE J1527 Type B, USCG - Type B, USCG
and NMMA standards for fuel feed and vent hoses. Multiple 
plies of reinforcement provide superior flexibility and good 
bend radius.
SIZE 1/4" I.D. thru 5/8" I.D.
DESC. Black with red lettering.
PACKAGING 250 ft. coils. Standard P/O cartons. Standard poly bags.

Series 350 - 360
    

"Flex-Alcohol" Alcohol Resistant Type A Fuel.  
Excellent resistance to fire, heat, ozone, and permeation by 
alcohol blended gasoline and diesel fuels. Compounded to
meet or exceed SAE-J1527 Type A, ISO/DIS 7840, USCG and
NMMA standards for fuel feed, fill and vent hoses.
1-1/2" I.D. thru 2-3/8" I.D. has wire helix for excellent flexibility.
SIZE 1/4" I.D. thru 2-3/8" I.D.
DESC. Black with red lettering or stripe.
PACKAGING. 250 ft. coils 1/4" thru 1/2". 150 ft. coils thru 5/8". 100 ft. coils thru 3/4".
Standard P/O cartons. Standard poly bags.

Vent & Ducting

Series 400
    Blower Vent
PVC blower vent hose supported by copper plated wire helix 
and resistant to ozone, sunlight and weathering. Does not
support combustion.
SIZE   3" I.D. thru 4" I.D.
DESC.  Black or white
PACKAGING 50 ft. cartons. Standard poly bags.

Series 420
        Blower Vent - Heavy Duty
Heavy duty PVC blower vent hose with vinyl coated wire helix per UL specifications. Resistant to ozone sunlight and weathering.
Will not support combustion.
SIZE  3" I.D. thru 4" I.D.
DESC.  Black
PACKAGING  Bulk Cartons.

Series 460
    Non - Insulated A/C Ducting
Heavy duty PVC fabric reinforced A/C ducting with nylon and a metallic helix to insure maximum air flow and minimum condensation. Resistant to ozone sunlight. Manufactured to meet or exceed UL Class 1 standards of flame resistance.
SIZE 3" I.D. thru 7" I.D.
DESC. Gray
PACKAGING   25 ft. lengths. Bulk packaging.

Series 480
        Insulated A/C Ducting
Insulated A/C ducting manufactured to meet or exceed UL Class 1 standards of flame resistance.
SIZE 3" I.D. thru 7"
DESC. Aluminized exterior with heavy fiberglass insulation.
PACKAGING 25 ft. lengths. Bulk packaging.